Schaffner Configurator

Supply

Product Type

Selection

to
[V]
to
[A]
to

Sort by

126 products were found.

RT series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 6 to 20 A
  • Up to 600 VAC and VDC
  • 2- and 3-wire configurations
  • Horizontal and vertical PCB mounting types
  • Ruggedized saturation and thermal behavior
  • Open construction for forced and convection cooling
  • Straightforward pin-out for easy PCB design
Attenuation performance : very high
Operating frequency : 0 to 400 Hz
Rated current : 6 to 20 A
Common Mode Choke: Compact design and good temperature behavior

Common Mode Choke

Compact design and good temperature behavior

  • Automotive
  •  » Common Mode Choke
  • Schaffner provides horizontal and vertical common mode choke for automotive application with rated current from 16 A to 50 A.
Door Handle Keyless Antenna: Long range and compact design

Door Handle Keyless Antenna

Long range and compact design

  • Automotive
  •  » Antennas
  •  » Door handle Antenna
  • Door handle keyless antenna, also called LFA antenna, is placed in door handle of a car.
  • Schaffner keyless antennas provide a long range of operation, compact design and best quality.

ecosine active sync

Active Harmonic Filter ecosine active sync

  • PQ/Harmonics
  •  »
  • Most effective harmonic mitigation up to the 50th order, parameter setting for even and odd harmonics
  • Compact active harmonic filter for 3-phase loads with and without neutral wire
  • <5% THID achievable even on most complex mixed loads and @ changing load profiles
  • New modular design with intelligent system approach - to offer tailored solutions for different applications and customers
  • 3-Level IGBT inverter topology for reduced power losses
  • Extended temperature range of modules up to 50°C
  • Ultra-fast and dynamic reactive power compensation (inductive and capacitive)
  • Load balancing and unloading of neutral wires
  • Flicker compensation (if caused by reactive power)
  • Compliance with IEEE 519, EN 61000-3-12 and other power quality standards
  • User-friendly, easy to install and maintain
HV DC Filter: Reduce EMI noise and meet the stringent automotive standards

HV DC Filter

Reduce EMI noise and meet the stringent automotive standards

  • Automotive
  •  » EMC/EMI Filters
  •  » HV DC Filter
  • HV DC filter is wired between DC bus of power electronic and high voltage battery. The main function of this Schaffner filter is to reduce EMI noise and meet the stringent automotive standards.
Immobilizer Antenna: Prevent an unwanted startup of a car

Immobilizer Antenna

Prevent an unwanted startup of a car

  • Automotive
  •  » Antennas
  •  » Immobilizer Antenna
  • Immobilizer Antennas, also called keylock cylinder antennas, are placed in the ignition switch lock cylinder, inside a car. The system with an immobilizer antenna is to prevent an unwanted startup of a car.
Inductors: Innovative winding design with carefully selected core materials

Inductors

Innovative winding design with carefully selected core materials

  • Automotive
  •  » Inductors
  • Schaffner provides inductors for automotive DC-DC converters for various range of power.
Interior keyless antenna: Long range and best quality

Interior keyless antenna

Long range and best quality

  • Automotive
  •  » Antennas
  •  » Indoor Keyless Antenna
  • Interior keyless antenna, also called LFA antenna, is placed inside a car. Schaffner keyless antennas provide a long range of operation, compact design and best quality.
FN 3441: Ecosine evo, 50 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3441

Ecosine evo, 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier with DC-link choke
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3451: Ecosine evo, 50 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3451

Ecosine evo, 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier with DC-link choke
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3453: Ecosine evo, 60 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3453

Ecosine evo, 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier with DC-link choke
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3440: Ecosine evo, 50 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3440

Ecosine evo, 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier without DC-link choke and thyristor rectifier
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3450: Ecosine evo, 50 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3450

Ecosine evo, 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier without DC-link choke and thyristor rectifier
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use
FN 3452: Ecosine evo, 60 Hz Passive Harmonic Filters

(depending on filter configuration)

FN 3452

Ecosine evo, 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Evo line (5% THID)
  • The industry standard for 6-pulse rectifier and motor drives
  • Filters for diode rectifier without DC-link choke and thyristor rectifier
  • Best-in-class partial load performance
  • Most compact design
  • Plug and play, ready to use

FN 2211 HV and FN 2210 HV

Compact high current DC EMC/EMI filter

  • EMC/EMI Products
  •  » DC Filters
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent premature panel aging
  • Helps to meet international EMC regulations
  • Most compact standard solution in the industry
  • FN 2210 HV without Cy capacitors to ground
Attenuation performance : standard
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
LC - LCL filters:

LC - LCL filters

  • Power Magnetics
  •  » Filters
  •  » LC - LCL filters
  • Schaffner LC- and LCL-filters are harmonic filters usually used on the grid side of renewable energy sources, like wind energy and photovoltaic (PV) plants. These devices improve and ensure the overall power quality of the produced energy.
DC reactors:

DC reactors

  • Power Magnetics
  •  » Inductors
  •  » DC reactors
  • The primary purpose of a DC reactor is to smooth the current pulses in DC circuits and to reduce the damaging harmonics on the power line.
Line reactors:

Line reactors

  • Power Magnetics
  •  » Inductors
  •  » Line reactors
  • A line reactor is an inductor which is wired in series between a power source and a load. Line reactors, also called input AC reactors, are generally used in motor drive applications. The main function of this Schaffner component lies into its current limiting characteristics.
Load reactors:

Load reactors

  • Power Magnetics
  •  » Inductors
  •  » Load reactors
  • Schaffner load reactors work on the AC output side of frequency converters or other sensitive equipment in series to the electrical consumer. Load reactors, also known as output reactors or dv/dt reactors, essentially protect the load, normally an electrical motor.

FN 2010

General Purpose AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Rated currents from 1 to 60 A
  • General purpose filtering performance
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional DC optimized versions
Attenuation performance : standard
Leakage current : 0.74 mA
Leakage current (A types) : 0.074 mA
Leakage current (B types) : 0.002 mA
Operating frequency : DC to 400 Hz

Middle frequency transformers

  • Power Magnetics
  •  » Transformers
  •  » Middle frequency transformers
  • Schaffner middle frequency (MF) transformers take your high-demand and advanced applications to the next level. Since the beginning of the MF transformers development, we have been at the cutting edge of this technology.
Sine wave filters:

Sine wave filters

  • Power Magnetics
  •  » Filters
  •  » Sine wave filters
  • Sine wave filters are low pass frequency filters which convert the rectangular PWM output signal of motor drives into a smooth sine wave voltage with low residual ripple. Sine wave filters, alternatively called output filters or sinusoidal filters, are mainly used in combination with variable speed drives (VSD) to protect the motor against excessive voltage spikes and overheating.
dv/dt filters:

dv/dt filters

  • Power Magnetics
  •  » Filters
  •  » dv/dt filters
  • Our dv/dt filters protect motors against high voltage increases and voltage peaks at motor terminals. Since modern motor solutions consist of variable speed drives (VSD), dv/dt filters are a vital system component.
Special reactors:

Special reactors

  • Power Magnetics
  •  » Inductors
  •  » Special reactors
  • Advanced reactors
  • Air core reactors
  • Common mode (CM) reactors
  • di/dt reactors
  • Harmonic compensated reactors
  • High reactance reactors
  • Saturable reactors
  • Swinging reactors
  • Switching frequency (SF) reactors
  • Trap reactors

FN 2020

General Purpose AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Rated currents from 1 to 60 A
  • High differential-mode attenuation
  • Optional medical version (B type)
  • Optional safety version (A type)
Attenuation performance : standard
Leakage current : 0.74 mA
Leakage current (A types) : 0.074 mA
Leakage current (B types) : 0.002 mA
Operating frequency : DC to 400 Hz
Multi-pulse drive transformers:

Multi-pulse drive transformers

  • Power Magnetics
  •  » Transformers
  •  » Multi-pulse drive transformers
  • Schaffner provides isolation multi-pulse drive transformers for variable speed and variable frequency drive applications. These units, also named rectifier transformers, are not just oversized standard units, but are designed specifically for inherent harmonics, minimal space requirements, and other unique characteristics of drive systems.
Magne-Seal: Solution for premium-duty sealed transformer needs

Magne-Seal

Solution for premium-duty sealed transformer needs

  • Power Magnetics
  •  » Technologies
  • Schaffner’s exclusive Magne-Seal design provides the solution for premium-duty sealed transformer needs in heavy commercial and industrial applications. It combines the environmentally friendly, cost-effective, flexible design benefits of dry-type transformers and the protection capabilities of cast coil and liquid-filled transformers.
Traction transformers:

Traction transformers

  • Power Magnetics
  •  » Transformers
  •  » Traction rolling stock transformers
  • Schaffner brings a wide experience in the traction rolling stock transformer business. Since decades, we design and produce successfully high quality devices and solutions for the railway market.

FN 2030

General Purpose AC/DC EMI Filter with High Attenuation Performance

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Rated currents from 1 to 30 A
  • High performance filter attenuation
  • High differential-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional overvoltage protection (Z type)
Attenuation performance : standard
Leakage current : 0.34 to 0.87 mA
Leakage current (A types) : 0.074 mA
Leakage current (B types) : 0.002 mA
Operating frequency : DC to 400 Hz
High efficiency transformers:

High efficiency transformers

  • Power Magnetics
  •  » Transformers
  •  » High efficiency transformers
  • Schaffner high efficiency transformers offer the best ratio between initial cost and operating cost for sensitive applications. We are experienced in designing the ideal construction and finding the optimum material mix for lower transformer losses.

FN 2060

Multi-stage General Purpose AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 30 A
  • High differential and common-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Attenuation performance : standard
Leakage current : 0.734 to 0.867 mA
Leakage current (A types) : 0.074 mA
Leakage current (B types) : 0.002 mA
Operating frequency : DC to 400 Hz
Distribution transformers:

Distribution transformers

  • Power Magnetics
  •  » Transformers
  •  » Distribution transformers
  • Schaffner is the leading supplier of dry-type transformer products for distribution and trackside power applications. Strong technical expertise and vast application experience allow us to design the best solutions for these demanding applications

FN 2070

Multi-stage Performance AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 36 A
  • High differential and common-mode attenuation
  • High frequency attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Attenuation performance : high
Leakage current : 0.734 to 0.867 mA
Leakage current (A types) : 0.074 mA
Leakage current (B types) : 0.002 mA
Operating frequency : DC to 400 Hz

FN 2080

Multi-stage High Performance AC/DC EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 16 A
  • High differential and common-mode attenuation
  • Good low frequency attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Attenuation performance : high
Leakage current : 0.734 mA
Leakage current (A types) : 0.074 mA
Leakage current (B types) : 0.002 mA
Operating frequency : DC to 400 Hz
Transformer refurnishing: Solution when a dry-type transformer or other magnetic device fails

Transformer refurnishing

Solution when a dry-type transformer or other magnetic device fails

  • Power Magnetics
  •  » Services
  • Schaffner Transformers can provide a solution when you experience the failure of a dry-type transformer or other magnetic device. Disposal of the failed unit is no longer your only option. Enduring lead times of six months or more for new units and solving the problem of different dimensions and termination locations is no longer necessary. Schaffner Transformers is your answer.

FN 2090

Multi-stage AC/DC EMI Filter with Excellent Attenuation Performance

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 30 A
  • Two-stage filter
  • Very high differential and common-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional overvoltage protection (Z type)
Attenuation performance : very high
Leakage current : 0.5 to 1.02 mA
Leakage current (A types) : 0.08 mA
Leakage current (B types) : 0.002 mA
Operating frequency : DC to 400 Hz
FN 2200: EMC/EMI Filter for PV Inverters

(600 VDC) (850 VDC)

FN 2200

EMC/EMI Filter for PV Inverters

  • EMC/EMI Products
  •  » DC Filters
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent pre-mature panel aging because of HF leakage currents
  • Helps to meet international EMC regulations for the entire PV system
  • Most compact standard solution in the industry, optionally available without capacitors to ground (B types)
  • New: up to 2300 A
Attenuation performance : very high
Rated current : 25 to 2300 A
Voltage : ≤ 1200 V

FN 2211 and FN 2210

Compact high current DC EMC/EMI filter

  • EMC/EMI Products
  •  » DC Filters
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent premature panel aging
  • Helps to meet international EMC regulations
  • Most compact standard solution in the industry
  • FN 2210 without Cy capacitors to ground
Attenuation performance : standard
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal

FN 2410 and FN 2412

EMC/RFI Filters for Industrial Electronics

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Excellent filter performance for applications with high interference levels
  • Filters for two-phase supply up to 2x 520 VAC (P-P) available
  • Fast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45 A
  • Industrial grade terminal blocks for unsurpassed electrical safety
Attenuation performance : very high
Leakage current : 3.4 mA
Operating frequency : DC to 400 Hz

FN 2450

Safe and ergonomic EMC/EMI filter with very low leakage current

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Light weight plastic enclosure design
  • Very low filter leakage current
  • Hinged safety covers
  • Embedded filter terminals
  • Different performance levels
  • Environmental friendly design without potting compound
Attenuation performance : high
Leakage current (B types) : 0.002 mA
Operating frequency : DC to 400 Hz
FN 3025/FN 3026: DIN-Rail EMC/RFI Filter with Minimum Leakage Current

Design protected by European patent (EP 1727280)

FN 3025/FN 3026

DIN-Rail EMC/RFI Filter with Minimum Leakage Current

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Compact state-of-the-art filter concept
  • Light weight plastic enclosure design
  • Minimized filter leakage current
  • Hinged safety covers
  • Revolutionary embedded filter terminals
  • Chassis or DIN-rail mounting option
  • Selectable performance level
  • Environmental friendly design without potting compound
Attenuation performance : standard
Leakage current : 0.4 to 2.5 mA
Motor power : 5.5 to 30 kW
Operating frequency : DC to 60 Hz
Rated current : 10 to 50 A
Voltage : ≤ 520 V
FN 3100: Bookstyle EMC/EMI Filter for Motor Drives

(FN 3100 up to 150 A)

FN 3100

Bookstyle EMC/EMI Filter for Motor Drives

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Exceptional broadband attenuation performance from 10 kHz up to 30 MHz
  • Slim and user-friendly book-style design with touch-safe terminal blocks for minimum space and maximum safety
  • Enables compliance with Class B limits
Attenuation performance : very high
Leakage current : 48.9 to 71.5 mA
Motor power : 22 to 160 kW
Operating frequency : DC to 60 Hz
Rated current : 35 to 300 A
Voltage : ≤ 520 V

FN 3120

High-Performance EMC/RFI Filter for Drives

  • EMC/EMI Products
  •  » 3-Phase Filters
  • High performance filter for extremely noisy applications
  • Significantly improves the reliability and immunity of installations
  • Enables compliance with Class B limits even with very long cables
Attenuation performance : very high
Leakage current : 97.9 mA
Motor power : 15 to 132 kW
Operating frequency : DC to 60 Hz
Rated current : 25 to 230 A
Voltage : ≤ 520 V

FN 3256

Compact Line Filter for Industrial Machinery/Equipment

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Compact, space-saving design, optimized for industrial machinery
  • Combines high attenuation performance with low leakage current
  • Performance according to the machine tool standard EN 50370-1
  • Increases also the immunity if operated directly on the mains input
Attenuation performance : high
Leakage current : < 1 mA
Operating frequency : DC to 60 Hz
Rated current : 8 to 160 A
Voltage : ≤ 520 V

FN 3258

Ultra-compact EMC/RFI Filter for Motor Drives Applications

  • EMC/EMI Products
  •  » 3-Phase Filters
  • New: solid safety connector blocks available for the whole range
  • Exceptional attenuation performance from 150 kHz to 30 MHz
  • Excellent saturation resistance up to 50 m cable length
  • Most compact and slim filter design in its class
Attenuation performance : very high
Leakage current : 33 mA
Motor power : 4 to 110 kW
Operating frequency : DC to 60 Hz
Rated current : 7 to 180 A
Voltage : ≤ 520 V

FN 3268

EMC/EMI Filter for Installations with Residual Current Device (RCD)

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Full functionality with RCDs according to IEC 61008 and new VDE 0664-110*
  • Compatible with 30 mA RCDs up to 30 m motor cable for electric shock protection according to IEC 61008
  • Compatible with 300 mA RCDs up to 100 m motor cable for fire protection according to IEC 60364-4-42 (VDE 0100-482)
Attenuation performance : very high
Leakage current : 4.5 to 37 mA
Motor power : 4 to 110 kW
Operating frequency : DC to 60 Hz
Rated current : 7 to 180 A
Voltage : ≤ 520 V

FN 3270

Compact EMC/RFI Filter for Industrial Motor Drive Applications

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Very compact and light weight design requiring minimum space
  • Easy, time-saving installation and contacting
  • Protective covers as optional accessory available
  • Attenuation performance according to EN 61800-3/A11
Attenuation performance : standard
Leakage current : 26.4 to 59.5 mA
Motor power : 5.5 to 560 kW
Operating frequency : DC to 60 Hz
Rated current : 10 to 1000 A
Voltage : ≤ 520 V

FN 3280

High-end Line Filter for Machinery/Equipment

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Now available up to 600 A
  • Compact, space-saving design, optimized for industrial machinery
  • Combines exceptional attenuation with low leakage current
  • Suitable for machines in mixed/domestic environments (Class A/B)
  • Increases also the immunity if operated directly on the mains input
Attenuation performance : very high
Leakage current : < 1 mA
Operating frequency : DC to 60 Hz
Rated current : 8 to 600 A
Voltage : ≤ 520 V

FN 3311/FN 3310

Compact power line AC EMC/EMI filter

  • EMC/EMI Products
  •  » 3-Phase Filters
  • High current 3-phase filter up to 2300 A
  • Extremely compact and light weight design
  • Minimum installation foot print
  • Performance optimised for standard purpose applications
  • FN 3310 series without Cy capacitors to ground
  • FN 3311 IT versions for use in IT power networks
Attenuation performance : standard
Climatic category : 40/100/21 acc. to IEC 60068-1
Operating frequency : DC to 60 Hz
Terminals/Housing : Ni plated cu bars/Metal

FN 3311 HV and FN 3310 HV

Compact 690 VAC power line EMC/EMI filter

  • EMC/EMI Products
  •  » 3-Phase Filters
  • High current 3-phase filter up to 2300 A
  • Extremely compact and light weight design
  • Minimum installation foot print
  • Performance optimised for standard purpose applications
  • FN 3310 HV series without Cy capacitors to ground
  • FN 3311 HVIT versions for use in IT power networks
Attenuation performance : standard
Climatic category : 40/100/21 acc. to IEC 60068-1
Operating frequency : DC to 60 Hz
Terminals/Housing : Ni plated cu bars/Metal
FN 3359: High-current EMC/RFI Filter

(600 VAC)

FN 3359

High-current EMC/RFI Filter

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Off-the-shelf high power filter for rated currents up to 2500 A
  • HV versions designed for 690 VAC IT power networks
  • Busbars for convenient and universal electrical connection
  • Protective plastic covers optionally available for unsurpassed safety
Attenuation performance : very high
Leakage current : < 6 mA
Motor power : 75 to 2000 kW
Operating frequency : DC to 60 Hz
Rated current : 150 to 2500 A
Voltage : ≤ 690 V
FN 9222: General Performance IEC Inlet Filter

(CQC except HI-types)

FN 9222

General Performance IEC Inlet Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 20 A
  • Excellent performance/size ratio
  • Optional medical versions (B type) according to IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
  • Optional overvoltage protection (Z type)
Attenuation performance : standard
Compliant IEC/EN 60601-1
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 20 A
Voltage : ≤ 250 V
FN 9222 E: General Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9222 E

General Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Excellent performance/size ratio
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Optional wide mounting flanges
Attenuation performance : standard
Compliant IEC/EN 60601-1
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 15 A
Voltage : ≤ 250 V

FN 9226

HF Performance EMC/EMI Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 10 A
  • Faston connection
  • Optional PCB through hole connection
  • Good HF coupling to the equipment housing
  • Optional medical versions (B type)
Attenuation performance : standard
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 10 A
Voltage : ≤ 250 V
FN 9233: High Performance EMC/EMI Filter

(CQC except HI-types)

FN 9233

High Performance EMC/EMI Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Excellent attenuation performance
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Attenuation performance : standard
Compliant IEC/EN 60601-1
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 15 A
Voltage : ≤ 250 V
FN 9233 E: High Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9233 E

High Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Excellent attenuation performance
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Attenuation performance : very high
Compliant IEC/EN 60601-1
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 15 A
Voltage : ≤ 250 V
FN 9244: Excellent Performance EMC/EMI Filter

(CQC except HI-types)

FN 9244

Excellent Performance EMC/EMI Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Superior attenuation performance
  • Optional earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Attenuation performance : very high
Compliant IEC/EN 60601-1
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 15 A
Voltage : ≤ 250 V
FN 9244 E: Excellent Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9244 E

Excellent Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 15 A
  • Superior attenuation performance
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Attenuation performance : very high
Compliant IEC/EN 60601-1
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 15 A
Voltage : ≤ 250 V

FN 9246

High Performance IEC Inlet Filter

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 20 A
  • Optional medical versions (B type)
  • Rear mounting
  • Excellant attenuation in the lower
  • frequency range
Attenuation performance : high
Leakage current : 373 to 797 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 20 A
Voltage : ≤ 250 V

FN 9260

General Purpose Power Entry Module with Fuses

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 10 A
  • For one or two fuses
  • Optional safety version (A type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)
Attenuation performance : standard
Leakage current : 373 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 10 A
Voltage : ≤ 250 V
FN 9264: Compact filtered power entry module

(CQC except HI-types)

FN 9264

Compact filtered power entry module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Compact size
  • Rated currents up to 10 A
  • Complies with IEC/EN 60601-1
  • High quality 2-pole rocker switch
  • Good attenuation performance
  • Snap-in versions (S type)
Attenuation performance : high
Leakage current : 373 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 10 A
Voltage : ≤ 250 V
FN 9280: Ultra Compact and Versatile Filtered Power Entry Module

(CQC except HI-types; Patent US 20110227692/US 8766761; CN ZL201080069589.0)

FN 9280

Ultra Compact and Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Single stage filter
  • Ultra compact design
  • Rated currents up to 10 A
  • dual-fuse holder
  • Fuses Ø5x20 mm
  • 2-pole rocker switch
  • Good attenuation performance
  • Faston or spring cage terminals
Attenuation performance : high
Leakage current medical (B types) : < 5 µA
Leakage current standard : < 500 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 10 A
Voltage : ≤ 250 V
FN 9290: Ultra Compact and Versatile Filtered Power Entry Module

(CQC except HI-types; Patent US 20110227692/US 8766761; CN ZL201080069589.0)

FN 9290

Ultra Compact and Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Dual stage filter
  • Ultra compact design
  • Rated currents up to 10 A
  • Dual fuse holder
  • 2-pole rocker switch
  • Good attenuation performance
  • Faston or spring cage terminals
Attenuation performance : very high
Leakage current medical (B types) : < 5 µA
Leakage current standard : < 500 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 10 A
Voltage : ≤ 250 V
C13 IEC Connector: Rewireable Connector for individual Power Cord with Locking System

Patents: EU Patent No. EP 14594121

C13 IEC Connector

Rewireable Connector for individual Power Cord with Locking System

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » Power Cords with Locking System
  • Guards against accidental disconnection
  • Requires no other equipment or special inlets to secure it
  • Rewireable - offering total flexibility when assembling cables
  • Fits any Schaffner IEC C14 inlet Filter
  • Can be retrofitted
  • Various power line plugs for international usage
  • LSZH - Low smoke zero halogen
Attenuation performance : very high
Cable size : 3C x 1.50mm²
Color : black

IL 13, 13 P, 19

Power Cord with Locking System

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » Power Cords with Locking System
  • Locking system for standardized IEC C14/C20 inlet filter
  • No accidental disconnection
  • Rated current up to 10 A (C13 plug), up to 15 A (C13P plug), and up to 16 A (C19 plug)
  • Fits any Schaffner IEC C14/C20 inlet filter
  • Retrofit for any IEC C14/C20 inlet
  • Various power line plugs for international usage
Attenuation performance : standard
Color : black
Connector line side : C14; CEE7/VII; BS 1363; NEMA 5-15; SEV 1011; JIS 8303
Connector load side : C13 with IEC lock
Frequency : 50/60 Hz
Length : 2 m
Operating frequency : DC to 60 Hz
Rated Current : 10 A
Voltage : ≤ 250 V

RN series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 0.3 to 10 A
  • DC to 400 Hz frequency
  • 100 kHz to 3 MHz common-mode resonance frequency
  • Dual-choke configurations
  • Multiple PCB-mounting options
Attenuation performance : very high
Frequency (DC) : 1 kHz
Inductance : 0.4 to 100 mH
Rated current : 0.3 to 10 A

RI series

Saturating Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Saturating Chokes
  • Rated currents from 1.5 to 25 A
  • Up to 500 VAC operating voltage
  • DC to 1 kHz frequency
  • Single or dual-choke configurations
Attenuation performance : very high
Frequency (DC) : 1 kHz
Rated current : 1.5 to 25 A
Voltage : ≤ 500 V

RD series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 6 to 64 A
  • Up to 600 VAC or 850 VDC
  • DC to 400 Hz frequencies
  • Dual, triple and quad-choke configurations
Attenuation performance : very high
Inductance : 0.2 to 25 mH
Operating frequency : DC to 400 Hz
Rated current : 6 to 64 A

RB series

Current-compensated Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 16 to 50 A
  • Up to 600 VAC or 1000 VDC
  • 2- and 3-wire configurations
  • Horizontal and vertical PCB mounting types
  • Ruggedized saturation and thermal behavior
  • Open construction for forced and convection cooling
  • Straightforward pin-out for easy PCB design
Attenuation performance : very high
Inductance : 0.2 to 3 mH
Operating frequency : DC to 400 Hz
Rated current : 16 to 50 A

IT series with single secondary winding

Pulse Transformer with Single Secondary Winding

  • EMC/EMI Products
  •  » Pulse Transformers
  • Galvanic separation of drive and power circuit
  • Voltage resistance up to 8 kV
  • Ignition current up to 3 A
  • Turns ratio up to 3:1
Attenuation performance : very high
Frequency : ≤ 40000 Hz
Ignition currents : 0.1 to 3 A
Operating frequency : DC to 40000 Hz
Rise time : 0.3 to 2.3 µs

IT series with double secondary winding

Pulse Transformer with Double Secondary Winding

  • EMC/EMI Products
  •  » Pulse Transformers
  • Galvanic separation of drive and power circuit
  • Voltage resistance up to 4 kV
  • Ignition current up to 1 A
  • Turns ratio up to 3:1:1
Attenuation performance : very high
Frequency : ≤ 40000 Hz
Ignition currents : 0.1 to 1 A
Operating frequency : DC to 40000 Hz
Rise time : 0.4 to 4 µs

EV/EH series

Common-mode Suppression Chokes

  • EMC/EMI Products
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents up to 5 A
  • Broadband attenuation characteristics
  • Low magnetic leakage flux
  • UL rated materials
  • RoHS compliant
Attenuation performance : very high
Inductance : 0.5 to 90 mH
Operating frequency : DC to 400 Hz
Rated current : 0.3 to 5 A
Voltage : ≤ 250 V
FN 258: Book-style EMC/RFI Filter for Inverters and Power Drive Systems

UL/CSA: FN 258 up to 180 A (ex. -180-07)

FN 258

Book-style EMC/RFI Filter for Inverters and Power Drive Systems

  • EMC/EMI Products
  •  » 3-Phase Filters
  • Industry standard EMC solution for three-phase PDS filtering
  • Slim space-saving book-style housing
  • Solid safety connector blocks or optional wire output connections
  • Excellent attenuation performance
  • HV versions for up to 690 VAC
  • HVIT versions for IT distribution networks
  • P/L versions with low leakage current
Attenuation performance : very high
Leakage current : 0.7 to 30 mA
Motor power : 4 to 132 kW
Operating frequency : DC to 60 Hz
Rated current : 7 to 250 A
Voltage : ≤ 690 V
FN 280: Compact filtered power entry module

(CQC except HI-types)

FN 280

Compact filtered power entry module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Complies with IEC/EN 60601-1
  • Rated currents up to 10 A
  • Single or dual-fuse holder
  • Fuses Ø5 x 20 mm
  • 2-pole rocker switch
  • General purpose application
  • Optional earth line choke (E type)
  • Optional medical versions (B type)
Attenuation performance : standard
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 10 A
Voltage : ≤ 250 V

FN 332

Performance EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Rated currents from 1 to 10 A
  • Compact housing
  • Optional overvoltage protection (Z type)
Attenuation performance : standard
Leakage current : 340 µA
Operating frequency : DC to 400 Hz

FN 343

Performance EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Two-Stage Filters
  • Rated currents from 1 to 10 A
  • Dual-stage filter
  • Compact housing
  • Integrated earth line choke
Attenuation performance : standard
Leakage current : 0.734 to 0.867 mA
Operating frequency : DC to 400 Hz

FN 350

Compact EMC/RFI Filter for Motor Drives

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Single-Stage Filters
  • Compact filter solution for single-phase motor drive applications
  • Industrial grade safety terminal blocks
  • Designed to meet EN 55011/14/22
  • Compliant with IEC 60950
Attenuation performance : standard
Leakage current : 4.9 to 11 mA
Operating frequency : DC to 400 Hz
FN 351: General Purpose EMC Filter

FN 351 up to 110 A, FN 351 H up to 110 A

FN 351

General Purpose EMC Filter

  • EMC/EMI Products
  •  » 3-Phase Filters
  • EMC solution for industrial inverters and motor drives
  • Rated currents from 8 to 280 A
  • Selectable voltage level of 440 V and 520 V
  • High differential and common-mode attenuation
  • Compliant with IEC 60950
Attenuation performance : high
Leakage current : 1.9 to 42.9 mA
Motor power : 3 to 160 kW
Operating frequency : DC to 60 Hz
Rated current : 8 to 280 A
Voltage : ≤ 520 V

FN 352 Z

Multi-stage EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Three-Stage Filters
  • Rated currents from 6 to 30 A
  • Surge pulse protection up to 2 kA
  • Solder or screw connection
Attenuation performance : very high
Operating frequency : DC to 400 Hz

FN 354

Compact Three-phase and Neutral Line Filter for High Frequency Attenuation

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Compact four-wire filter for applications with limited space
  • High attenuation performance up to 300 MHz
  • Equally suitable for star and delta power networks
Attenuation performance : high
Leakage current : 0.175 to 0.5 mA
Operating frequency : DC to 60 Hz
Rated current : 4 to 25 A
Voltage : ≤ 440 V

FN 355

Ultra-compact Low Leakage current EMC/EMI Filter

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Ultra-compact four-wire filter for applications lacking space
  • Exceptional low operating leakage current
  • Equally suitable for star and delta power networks
Attenuation performance : standard
Leakage current : 0.07 to 0.29 mA
Operating frequency : DC to 400 Hz
Rated current : 3 to 20 A
Voltage : ≤ 440 V
FN 356: General Purpose EMC/EMI Line Filter

(FN 356 up to 100 A)

FN 356

General Purpose EMC/EMI Line Filter

  • EMC/EMI Products
  •  » 3-Phase + Neutral Line Filters
  • Three-phase and neutral line filter for general four-wire filtering tasks
  • Choice of connection style
  • Low operating leakage current
  • Compliant with IEC 60950
  • Suitable to meet EN 55011/14/22
Attenuation performance : high
Leakage current : 0.43 to 8 mA
Operating frequency : 0 to 60 Hz
Rated current : 16 to 150 A
Voltage : ≤ 440 V

FN 370

Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 6 A
  • Single or dual-fuse holder
  • Fuses Ø6.3 x 32 mm or Ø5 x 20 mm
  • Voltage selector 100/120/230/240 V
  • General purpose application
  • Optional medical versions (B type)
Attenuation performance : standard
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 2 to 6 A
Voltage : ≤ 250 V

FN 380

Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 6 A
  • Single or dual-fuse holder
  • Fuses Ø6.3 x 32 mm Ø5 x 20 mm
  • 2-pole rocker switch
  • General purpose application
  • Optional medical versions (B type)
Attenuation performance : standard
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 2 to 6 A
Voltage : ≤ 250 V

FN 390

Versatile Filtered Power Entry Module

  • EMC/EMI Products
  •  » IEC Inlet Filters / Power Entry Modules
  •  » IEC Inlet Filters
  • Rated currents up to 10 A
  • For one or two fuses
  • Fuses Ø6.3 x 32 mm or Ø5 x 20 mm
  • 2-pole rocker switch
  • Voltage selector
  • Optional earth line choke (E type)
Attenuation performance : high
Leakage current : 560 to 797 µA
Operating frequency : DC to 400 Hz
Rated current : 1 to 10 A
Voltage : ≤ 250 V

FN 402

Low Cost PCB Filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 0.5 to 6.5 A
  • Compact PCB-mountable design
  • Very low profile
  • Optional medical versions (B type)
Attenuation performance : standard
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 0.5 to 6.5 A
Voltage : ≤ 250 V

FN 405

PCB-mounting filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 0.5 to 10 A
  • Compact PCB-mountable design
  • Low profile
Attenuation performance : standard
Leakage current : 373 µA
Operating frequency : DC to 400 Hz
Rated current : 0.5 to 10 A
Voltage : ≤ 250 V

FN 406

Ultra Compact EMC Filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 0.5 to 8.4 A
  • Aluminium case
  • Very compact PCB-mountable design
  • Low profile
  • Optional medical versions (B type)
Attenuation performance : standard
Leakage current : 373 µA
Leakage current (B types) : 2 µA
Operating frequency : DC to 400 Hz
Rated current : 0.5 to 8.4 A
Voltage : ≤ 250 V

FN 410

High Performance Two-stage PCB-mounting EMC Filter

  • EMC/EMI Products
  •  » PCB Filters
  • Rated currents from 0.5 to 6 A
  • High attenuation two-stage design
  • PCB-mountable design
Attenuation performance : high
Leakage current : 373 µA
Operating frequency : DC to 400 Hz
Rated current : 0.5 to 6 A
Voltage : ≤ 250 V

FN 700 Z

Three-stage EMC/EMI Filter

  • EMC/EMI Products
  •  » Single-Phase Filters
  •  » Three-Stage Filters
  • Rated currents from 6 to 20 A
  • IEC inlet for 6 and 10 A versions
  • Up to 3 GHz attenuation
  • High surge voltage protection
Attenuation performance : very high
Operating frequency : DC to 400 Hz

FN 751X

AC Feedthrough Capacitor

  • EMC/EMI Products
  •  » Feedthrough Components
  •  » Capacitors
  • IEC/EN 60384-14 approval
  • Rated currents from 10 to 200 A
  • 5 kV pulse test capability
  • Class Y2 capacitor
Attenuation performance : high
Capacitance : 2.2 to 220 nF
Frequency : 50/60 Hz
Leakage current : 0.21 to 20.7 mA
Operating frequency : DC to 60 Hz
Rated current : 10 to 200 A
Voltage : ≤ 300 V

FN 756X

DC Feedthrough Capacitor

  • EMC/EMI Products
  •  » Feedthrough Components
  •  » Capacitors
  • EN/IEC 60384-14 approval
  • Rated currents from 10 to 200 A
  • 2.5 kV pulse test capability
  • Class Y4 capacitor
Attenuation performance : high
Capacitance : 10 to 4700 nF
Leakage current : 0.49 to 230 mA
Rated current : 10 to 200 A
Voltage : ≤ 130 V

FN 761X

AC Feedthrough Filter

  • EMC/EMI Products
  •  » Feedthrough Components
  •  » Filters
  • IEC/EN 60939 approval
  • Rated currents from 10 to 250 A
  • 5 kV pulse test capability
  • Class Y2 capacitor
Attenuation performance : very high
Capacitance : 10 to 1000 nF
Frequency : 50/60 Hz
Leakage current : 1.89 to 188 mA
Operating frequency : DC to 60 Hz
Rated current : 10 to 250 A
Voltage : ≤ 300 V

FN 766X

DC Feedthrough Filter

  • EMC/EMI Products
  •  » Feedthrough Components
  •  » Filters
  • IEC/EN 60939 approval
  • Rated currents from 10 to 200 A
  • 2.5 kV pulse test capability
  • Class Y4 capacitor
Attenuation performance : very high
Capacitance : 10 to 4700 nF
Leakage current : 0.98 to 460.7 mA
Rated current : 10 to 200 A
Voltage : ≤ 130 V

FN 3410

Ecosine 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Full Performance Line (5% THID)
  • The industry standard for 6-pulse rectifiers and motor drives
  • The most compact 5% THID filter available
  • Excellent behavior under partial load conditions
  • Filters for diode rectifiers
Frequency : 50 Hz
THID : <5%

FN 3410 (Enclosed)

Ecosine high power passive harmonic filter modules

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Compact cabinet filter for quick installation and easy commissioning
  • Cost-effective enclosed passive harmonic filter
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for diode rectifiers
Frequency : 50 Hz
THID : ~5% (with LDC)

FN 3410 HV 690

Ecosine 50 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » HV Line (5% THID)
  • Filters for 3-phase diode and SCR rectifiers
  • The industry standard for AC and DC and motor drives
  • The most compact 5% THID filter available
  • Excellent behavior under partial load conditions
Frequency : 50 Hz
THID : <5%, ~5% (with LDC)

FN 3410 (IP 00)

Ecosine high power passive harmonic filter modules for system integration

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Modular and highly compact filter concept
  • Cost-effective open panel design for cabinet integration
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for diode rectifiers
Frequency : 50 Hz
THID : ~5% (with LDC)

FN 3411

Ecosine 50Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Full Performance Line (5% THID)
  • The industry standard for 6-pulse rectifiers and motor drives
  • Excellent behavior under partial load conditions
  • Filters for thyristor (SCR) rectifiers
Frequency : 50 Hz
THID : depending upon firing angle

FN 3411 (Enclosed)

Ecosine high power passive harmonic filter modules

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Compact cabinet filter for quick installation and easy commissioning
  • Cost-effective enclosed passive harmonic filter
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for thyristor (SCR) rectifiers
Frequency : 50 Hz
THID : all

FN 3411 (IP 00)

Ecosine high power passive harmonic filter modules for system integration

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Modular and highly compact filter concept
  • Cost-effective open panel design for cabinet integration
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for thyristor (SCR) rectifiers
Frequency : 50 Hz
THID : depending upon firing angle

FN 3412

Ecosine 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Full Performance Line (5% THID)
  • The industry standard for 6-pulse rectifiers and motor drives
  • The most compact 5% THID filter available
  • Excellent behavior under partial load conditions
  • Filters for diode rectifiers
Frequency : 60 Hz
THID : <5%

FN 3412 (Enclosed)

Ecosine high power passive harmonic filter modules

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Compact cabinet filter for quick installation and easy commissioning
  • Cost-effective enclosed passive harmonic filter
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for diode rectifiers
Frequency : 60 Hz
THID : ~5% (with LDC)

FN 3412 (IP 00)

Ecosine high power passive harmonic filter modules for system integration

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Modular and highly compact filter concept
  • Cost-effective open panel design for cabinet integration
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for diode rectifiers
Frequency : 60 Hz
THID : ~5% (with LDC)

FN 3413

Ecosine 60 Hz Passive Harmonic Filters

  • Ecosine passive
  •  » Full Performance Line (5% THID)
  • The industry standard for 6-pulse rectifiers and motor drives
  • Excellent behavior under partial load conditions
  • Filters for thyristor (SCR) rectifiers
Frequency : 60 Hz
THID : depending upon firing angle

FN 3413 (Enclosed)

Ecosine high power passive harmonic filter modules

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Compact filter for quick installation and easy commissioning
  • Cost-effective enclosed passive harmonic filter
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for thyristor (SCR) rectifiers
Frequency : 60 Hz

FN 3413 (IP 00)

Ecosine high power passive harmonic filter modules for system integration

  • Ecosine passive
  •  » High Power Line (5% THID)
  • Modular and highly compact filter concept
  • Cost-effective open panel design for cabinet integration
  • Optimized for motor drives with DC-link chokes
  • Helps to comply with international power quality standards
  • Supports an efficient utilization of electrical system capacity
  • Filters for thyristor (SCR) rectifiers
Frequency : 60 Hz
THID : depending upon firing angle

FN 3416

Ecosine Compact Economy Line of Passive Harmonic Filters

  • Ecosine passive
  •  » Economy Line (10% THID)
  • Economy line of passive harmonic filters for THID <10%
  • Help to comply with EN 61000-3-12, IEEE-519 and other PQ standards
  • Support an efficient utilization of electrical system capacity
  • Ideal for motor drives with 6-pulse rectifier front-end
  • Suitable for diode and thyristor (SCR) rectifiers applications
Frequency : 50 Hz
THID : <10%

FN 3416 LV

Ecosine Low-Voltage Economy Line of Passive Harmonic Filters

  • Ecosine passive
  •  » Economy Line (10% THID)
  • Economy line of passive harmonic filters for THID <7%
  • Help to comply with EN 61000-3-12, IEEE-519 and other PQ standards
  • Support an efficient utilization of electrical system capacity
  • Ideal for AC or DC motor drives with 6-pulse rectifier front-end
  • Suitable for 200-240 V diode and thyristor (SCR) rectifiers applications
Frequency : 50 Hz
THID : all

FN 3418

Ecosine Compact Economy Line of Passive Harmonic Filters

  • Ecosine passive
  •  » Economy Line (10% THID)
  • Economy line of passive harmonic filters for THID <10%
  • Help to comply with EN 61000-3-12, IEEE-519 and other PQ standards
  • Support an efficient utilization of electrical system capacity
  • Ideal for motor drives with 6-pulse rectifier front-end
  • Suitable for diode and thyristor (SCR) rectifiers applications
Frequency : 60 Hz
THID : <10%

FN 3418 LV

Ecosine Low-Voltage Economy Line of Passive Harmonic Filters

  • Ecosine passive
  •  » Economy Line (10% THID)
  • Economy line of passive harmonic filters for THID <7%
  • Help to comply with EN 61000-3-12, IEEE-519 and other PQ standards
  • Support an efficient utilization of electrical system capacity
  • Ideal for AC or DV motor drives with 6-pulse rectifier front-end
  • Suitable for 200-240 V diode and thyristor (SCR) rectifiers applications
Frequency : 60 Hz
THID : <10%
FN 3420: Ecosine active - the Compact, Fast, and Flexible Solution for Better Power Quality (3-wire)

(30 A to 100 A UL recognized/200 A to 300 A UL listed)

FN 3420

Ecosine active - the Compact, Fast, and Flexible Solution for Better Power Quality (3-wire)

  • Ecosine active
  •  » Ecosine active (<5% THID)
  • Global or selective compensation of Harmonic currents up to the 50th order
  • Compensation of displacement power factor
  • Load balancing capability
  • Response time of less than 300 microseconds
  • Compact solution for easy installation and intuitive operation
Compensation current : 30 to 300 A
Frequency : 47 to 63 Hz
THID : <5%, adjustable
Voltage : 200 to 480 V
FN 3420: Ecosine active Harmonic Filters 600/690 V (3-wire)

UL listed pending

FN 3420

Ecosine active Harmonic Filters 600/690 V (3-wire)

  • Ecosine active
  •  » Ecosine active (<5% THID)
  • Global or selective compensation of Harmonic currents up to the 50th order
  • Compensation of displacement power factor
  • Load balancing capability
  • Response time of less than 300 microseconds
  • 3-level topology with 20-30% lower losses
Compensation current : 0 to 200 A
Frequency : 47 to 63 Hz
THID : <5%, adjustable
Voltage : 500 to 690 V

FN 3420 GL

Ecosine active Harmonic Filters (3-wire) with Germanischer Lloyd

  • Ecosine active
  •  » Ecosine active (<5% THID)
  • Global or selective compensation of harmonic currents up to the 50th order
  • Compensation of displacement power factor
  • Load balancing capability
  • Response time of less than 300 microseconds
  • Compact solution for easy installation and intuitive operation
Compensation current : 100 or 120 A
Frequency : 47 to 63 Hz
THID : <5%, adjustable
Voltage : 380 to 480 V

FN 3430

Ecosine active - the Compact, Fast, and Flexible Solution for Better Power Quality (4-wire)

  • Ecosine active
  •  » Ecosine active (<5% THID)
  • Global or selective compensation of harmonic currents up to the 50th order
  • Compensation of displacement power factor
  • Load balancing capability
  • Response time of less than 300 microseconds
  • Compact solution for easy installation and intuitive operation
Compensation current : 30 to 300 A
Frequency : 47 to 63 Hz
THID : <5%, adjustable
Voltage : 380 to 415 V

FN 5020

Sine wave output filter for high-speed motor drives

  • Output filters
  •  » Sine wave filters
  • Smoothing of PWM drive output voltages
  • Increased service life of expensive high-speed motors
  • Reduction of audible motor noise
  • Improvement of system reliability
  • Production up-time for mission critical applications
Motor cable length : ≤200 m
Motor frequency : 0 to 600 Hz
Motor power : 15 to 75 kW
Rated current : 25 to 120 A
Switching frequency : 6 to 15 kHz
Voltage : 0 to 500 V

FN 5030

Add-on Sine Wave Module for Common-mode Voltage Improvement

  • Output filters
  •  » Sine wave plus filters
  • Additional module for use with FN 5020 and FN5040/45 sine wave filters
  • Reduction of common-mode interferences on motor cables
  • Improvement of EMC environment
  • Elimination of motor bearing damages
  • Possibility to use very long unshielded motor cables
  • Improvement of system reliability
Motor cable length : ≤1000 m
Motor frequency : 0 to 600 Hz
Motor power : 15 to 75 kW
Rated current : 25 to 120 A
Switching frequency : 6 to 15 kHz
Voltage : 0 to 500 V
FN 5040/FN 5045: LC Sine Wave Filter for Motor Drives

UL 61800-5-1 up to 750 A for FN 5040, 480 A for FN 5045. For use with AC or DC drives (power conversion equipment) only

FN 5040/FN 5045

LC Sine Wave Filter for Motor Drives

  • Output filters
  •  » Sine wave filters
  • Smooth sine wave without voltage peaks
  • Perfect motor protection
  • Reduce bearing currents
  • Motor frequency up to 200 Hz
  • Extended motor cable length capability
Motor cable length : ≤2000 m
Motor frequency : 0 to 70 Hz
Motor power : 1.1 to 630 kW
Rated current : 4.5 to 1200 A
Switching frequency : 2 to 12 kHz
Voltage : 0 to 500 V
FN 5040 HV: LC Sine Wave Filter for 600 VAC and 690 VAC Motor Drives

(in preparation)

FN 5040 HV

LC Sine Wave Filter for 600 VAC and 690 VAC Motor Drives

  • Output filters
  •  » Sine wave filters
  • Smooth sine wave without voltage peaks
  • Motor protection against pulse pattern stress
  • Improvement of system reliability
  • Reduces bearing currents
  • Ideal for retrofit installations
  • Fits for long motor cable lengths (≤2000 m)
  • Motor drive power range up to 1,200 kW
Motor cable length : ≤2000 m
Motor frequency : 0 to 70
Motor power : 7.5 to 1200 kW
Rated current : 13 to 1320 A
Switching frequency : 2 to 16 kHz
Voltage : 0 to 690 V
FN 5060: Output Filter for Motor Drives

Under preparation for UL recognized

FN 5060

Output Filter for Motor Drives

  • Output filters
  •  » dv/dt filters
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 60 Hz
Motor power : 5.5 to 630 kW
Rated current : 12 to 1100 A
Switching frequency : 2 to 16 kHz
Voltage : 0 to 500 V
FN 5060 HV: Output Filter for Motor Drives

Under preparation: UL recognized label up to 320 A

FN 5060 HV

Output Filter for Motor Drives

  • Output filters
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 60 Hz
Motor power : 15 to 1000 kW
Rated current : 30 to 1200 A
Switching frequency : 0 to 16 kHz
Voltage : 0 to 760 V

FN 510

Output Filter for Motor Drives

  • Output filters
  •  » dv/dt filters
  • Reduction of drive output voltage dv/dt
  • Restriction of overvoltages on motor cables
  • Reduction of motor temperature
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 400 Hz
Motor power : 1.5 to 30 kW
Rated current : 4 to 66 A
Switching frequency : 2 to 16 kHz
Voltage : 380 to 500 V

FN 530

Sine Wave and EMC Output Filter for Motor Drives with a Voltage dc Link

  • Output filters
  •  » Sine wave plus filters
  • Smoothing of PWM drive output voltage
  • Efficient motor protection
  • Reduction of common-mode interferences on motor cables
  • Improvement of EMC environment
  • Elimination of motor bearing damages
  • Possibility to use very long unshielded motor cables
  • Improvement of system reliability
Motor cable length : ≤1000 m
Motor frequency : 0 to 200 Hz
Motor power : 1.5 to 7.5 kW
Rated current : 4 to 16 A
Switching frequency : 6 to 20 kHz
Voltage : 0 to 520 V
On-Site Transformer Rewind: On-site solution for dry-type transformer rewind needs

On-Site Transformer Rewind

On-site solution for dry-type transformer rewind needs

  • Power Magnetics
  •  » Services
  • Building design, elevator capacity, or other factors can make removal of a failed transformers very difficult and impractical. Traditional solutions, such as major building reconstruction or elaborate rigging methods, are time consuming and cost prohibitive. Schaffner has a cost-effective answer.
RWK 212: 3-phase Line Reactor for Motor Drive & Power Quality Applications

UL 508C up to 400 A. For use with AC or DC drives (power conversion equipment) only

RWK 212

3-phase Line Reactor for Motor Drive & Power Quality Applications

  • Reactors
  •  » AC Line Reactors
  • Provision of 4% impedance
  • Reduction of mains harmonics
  • Reduction of commutation notches
  • Protection of motor drive electronics
  • Limitation of inrush currents
  • Improvement of true power factor
Frequency : 50 to 60 Hz
Impedance : 4% @ 400 VAC, 50 Hz & rated current
Motor power : 1.5 to 830 W
Rated current : 4 to 1500 A
THID : appr. 40%
Voltage : ≤ 500 V
RWK 305: Three-phase dv/dt Reactor for Efficient Motor Protection

UL 508C up to 182 A. For use with AC or DC drives (power conversion equipment) only

RWK 305

Three-phase dv/dt Reactor for Efficient Motor Protection

  • Reactors
  •  » Load reactors
  • Reduction of drive output voltage dv/dt
  • Reduction of motor temperature
  • Increase of motor service life
  • Compact and economic open frame design
  • Standard catalog reactors up to 1100 A
  • UL rated materials used
Motor cable length : ≤50 m
Motor frequency : 0 to 60 Hz
Motor power : 1.5 to 630 kW
Rated current : 4 to 1100 A
Switching frequency : 2 to 16 kHz
Voltage : 380 to 500 V