Schaffner Output filters

  • Output filters

    Shaping electrical power

    Output filters

    Help to avoid problems that can result in purely functional difficulties to very severe motor damage

8 products were found.

FN 5020

Sine wave output filter for high-speed motor drives

  • Output filters
  •  » Sine wave filters
  • Smoothing of PWM drive output voltages
  • Increased service life of expensive high-speed motors
  • Reduction of audible motor noise
  • Improvement of system reliability
  • Production up-time for mission critical applications
Motor cable length : ≤200 m
Motor frequency : 0 to 600 Hz
Motor power : 15 to 75 kW
Rated current : 25 to 120 A
Switching frequency : 6 to 15 kHz
Voltage : 0 to 500 V

FN 5030

Add-on Sine Wave Module for Common-mode Voltage Improvement

  • Output filters
  •  » Sine wave plus filters
  • Additional module for use with FN 5020 and FN5040/45 sine wave filters
  • Reduction of common-mode interferences on motor cables
  • Improvement of EMC environment
  • Elimination of motor bearing damages
  • Possibility to use very long unshielded motor cables
  • Improvement of system reliability
Motor cable length : ≤1000 m
Motor frequency : 0 to 600 Hz
Motor power : 15 to 75 kW
Rated current : 25 to 120 A
Switching frequency : 6 to 15 kHz
Voltage : 0 to 500 V
FN 5040/FN 5045: LC Sine Wave Filter for Motor Drives

UL 61800-5-1 up to 750 A for FN 5040, 480 A for FN 5045. For use with AC or DC drives (power conversion equipment) only

FN 5040/FN 5045

LC Sine Wave Filter for Motor Drives

  • Output filters
  •  » Sine wave filters
  • Smooth sine wave without voltage peaks
  • Perfect motor protection
  • Reduce bearing currents
  • Motor frequency up to 200 Hz
  • Extended motor cable length capability
Motor cable length : ≤2000 m
Motor frequency : 0 to 70 Hz
Motor power : 1.1 to 630 kW
Rated current : 4.5 to 1200 A
Switching frequency : 2 to 12 kHz
Voltage : 0 to 500 V
FN 5040 HV: LC Sine Wave Filter for 600 VAC and 690 VAC Motor Drives

(in preparation)

FN 5040 HV

LC Sine Wave Filter for 600 VAC and 690 VAC Motor Drives

  • Output filters
  •  » Sine wave filters
  • Smooth sine wave without voltage peaks
  • Motor protection against pulse pattern stress
  • Improvement of system reliability
  • Reduces bearing currents
  • Ideal for retrofit installations
  • Fits for long motor cable lengths (≤2000 m)
  • Motor drive power range up to 1,200 kW
Motor cable length : ≤2000 m
Motor frequency : 0 to 70
Motor power : 7.5 to 1200 kW
Rated current : 13 to 1320 A
Switching frequency : 2 to 16 kHz
Voltage : 0 to 690 V
FN 5060: Output Filter for Motor Drives

Under preparation for UL recognized

FN 5060

Output Filter for Motor Drives

  • Output filters
  •  » dv/dt filters
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 60 Hz
Motor power : 5.5 to 630 kW
Rated current : 12 to 1100 A
Switching frequency : 2 to 16 kHz
Voltage : 0 to 500 V
FN 5060 HV: Output Filter for Motor Drives

Under preparation: UL recognized label up to 320 A

FN 5060 HV

Output Filter for Motor Drives

  • Output filters
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 60 Hz
Motor power : 15 to 1000 kW
Rated current : 30 to 1200 A
Switching frequency : 0 to 16 kHz
Voltage : 0 to 760 V

FN 510

Output Filter for Motor Drives

  • Output filters
  •  » dv/dt filters
  • Reduction of drive output voltage dv/dt
  • Restriction of overvoltages on motor cables
  • Reduction of motor temperature
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 400 Hz
Motor power : 1.5 to 30 kW
Rated current : 4 to 66 A
Switching frequency : 2 to 16 kHz
Voltage : 380 to 500 V

FN 530

Sine Wave and EMC Output Filter for Motor Drives with a Voltage dc Link

  • Output filters
  •  » Sine wave plus filters
  • Smoothing of PWM drive output voltage
  • Efficient motor protection
  • Reduction of common-mode interferences on motor cables
  • Improvement of EMC environment
  • Elimination of motor bearing damages
  • Possibility to use very long unshielded motor cables
  • Improvement of system reliability
Motor cable length : ≤1000 m
Motor frequency : 0 to 200 Hz
Motor power : 1.5 to 7.5 kW
Rated current : 4 to 16 A
Switching frequency : 6 to 20 kHz
Voltage : 0 to 520 V